The DVI Extender over Ethernet is composed of a DVI transmitter and a receiver. It can extend the
DVI signal of 1080P@60HZ as far as 100 meters through a single CAT6
cable. And it can also realize one-to-many broadcast transmission
through a ethernet switch. In addition, it also supports two-way
audio, network cable adaptation, automatic adjustment of resolution
output, the best display effect, simpler and more convenient. This
product is suitable for video conferencing, HD video capture,
multimedia education, digital advertising and signage.
Product Feature
1,The DVI extender over cat6 support 1ch DVI input, 1ch
bidirectional 232, 1ch returned infrared;
2, LED status indicator to monitor power, link, video and other
parameters;
3, advanced adaptive technology, no need to set electro-optic
adjustment when using;
4, support 1080P@60Hz signal transmission 100 meters.
5, support poe power supply via network cable, only need to offer
12V power at the transmitter side;
6, aluminum alloy cases design suitable for industrial harsh
environments;
Product specification:
| Product Name:1080P dvii extender over cat6 utp/stp cable |
| Video | DVI Version | DVI 2.0 |
| Number of Channels | 1Channel |
| DVI Transmitter Input/ Output Port | DVI Female port/1 x CAT6 |
| Video Format | 800×600-60HZ;1024×768-60HZ; 1280×720-60H;1280×800-60H
1280×1024-60HZ;1360×768-60HZ; 1440×900-60HZ;1600×1200-60HZ;
1680×1050-60HZ;1920×1080-60HZ; |
| DVI cable | ≤8m(AWG24) |
| Data | Data Protocol | RS232 |
| Data Rate | 0~115.2 Kbps |
| Error Rate | < 10-9 |
| Connector | Standard Terminal Block |
| Ethernet | Connector | RJ45 |
| Transmission Distance | 0~100meters |
| Data Rate | 10/100Mbps(AUTO) |
| General | Power | DC12V |
| Power Consumption | ≤5W |
| Working Temperature | -15ºC ~55ºC |
| Storage Temperature | -30ºC ~70ºC |
| Net Weight (pair) | 0.4Kg |
| Gross Weight(pair) | 0.7Kg |
| Dimension of Transmitter/Receiver | 105mm×102mm×28mm |
| Package size | 21.5×16×7cm |
| Installation | Desktop/Wall mount |
| MTBF | ≥ 100000Hours |
Panel Diagram
LED Status Indication as below:
| Interface | Transmitter and Receiver |
| DVI_IN | DVI signal input port |
| DVI_OUT | DVI signal output port |
| Link | Ethernet port |
| DC-5V | 12V Power port |
| A B C | RS232 port |
| Indicator Light | DVI Transmitter | DVI receiver |
| Link | On | Ethernet on |
| Off | No ethernet signal |
| Run | On | DVI signal on |
| Off | No DVI Signal |
| Power | On | Power on |
| Off | Power off |
| | | |
Installation:
1. Connect the DVI source to the DVI transmitter with an DVI cable.
2. Connect the DVI receiver to the display device with an DVI
cable.
3. Connect the sender and the receiver with a Cat 6 (recommended)
network cable.
4. Connect the 12V power supply to the device. When the device is
powered, the POWER light is on. When the video status light is on,
the device starts normally.
Package Information:
Standard package for 1pair dvi extender over cat6:
1pcs DVI transmitter&receiver,
2pcs DC12V1A power adaptors
1pcs user manual
All with pearl cotton protection
Application
dvi extender over cat6 are widely used in below fields:
1, large-scale multimedia high-definition display;
2, Information release and news centers;
3,Traffic guidance and information display systems;
4,Outdoor large-screen display systems;
5,Large-scale stage display and entertainment centers;
6,Live television broadcasts, multimedia conferences;
7, Military command and exercises fields etc.
Point to Point Application
Point to Multi Points Application
