The 4K HDMI Extender over Ethernet consists of a transmitter and a
receiver that transmits high-definition audio and video over a
local area network using standard TCP/IP protocols. The transmitter
and the receiver are connected by a single network cable, which
extends the HDMI signal to 150 meters, is compatible with CAT5/5e/6
type cable, and can also realize one-to-many broadcast transmission
through a ethernet switch. In addition, it also supports two-way
audio, network cable adaptation, automatic adjustment of resolution
output, the best display effect, simpler and more convenient. This
product is suitable for video conferencing, HD video capture,
multimedia education, digital advertising and signage.
Features:
1,the 4K HDMI Extender over Ethernet for 1port 4K HDMI,rs232 and
infrared signals over CAT5/5E/CAT6 cable;
2,support HDMI 1.3/HDCP1.1 & 1.2 version;
3,HDMI signal supports 4K/30Hz,1080P/60hz, downward compatible
4, support point-to-point, point-to-multipoint and cascade
transmission;
5,support international IEEE802.3 Ethernet standard;
6,0~150m long distance transmission;
7, No software settings, support hot plug;
Product specification:
| Product Name:4K HDMI Extender over Ethernet |
| Video | HDMI Version | HDMI 1.3/HDCP1.1 & 1.2 |
| Number of Channels | 1Channel |
| HDMI Transmitter Input/ Output Port | HDMI Female port/1 x CAT5/5E/CAT6 |
| Video Format | 800×600@60HZ;1024×768@60HZ; 1280×720@60H;1280×800@60HZ;
1280×1024@60HZ;1360×768@60HZ; 1440×900@60HZ;1600×1200@60HZ;
1680×1050@60HZ;1920×1080@60HZ; |
| Video Direction | Unidirectional |
| Data | Data Protocol | RS232 |
| Data Rate | 0~115.2 Kbps |
| Error Rate | < 10-9 |
| Connector | Standard Terminal Block |
| Ethernet | Connector | RJ45 |
| Transmission Distance | 0~150meters |
| Data Rate | 10/100Mbps(AUTO) |
| General | Power | DC12V1A |
| Power Consumption | ≤5W |
| Working Temperature | -15ºC ~55ºC |
| Storage Temperature | -30ºC ~70ºC |
| Net Weight (pair) | 0.4Kg |
| Gross Weight(pair) | 0.7Kg |
| Dimension of Transmitter/Receiver | 105mm×102mm×28mm |
| Package size | 21.5×16×7cm |
| Installation | Desktop/Wall mount |
| MTBF | ≥ 100000Hours |
Panel Diagram
| Interface | Transmitter and Receiver |
| HDMI_IN | HDMI signal input port |
| HDMI_OUT | HDMI signal output port |
| Link | Ethernet port |
| DC-12V | 12V Power port |
| A B C | RS232 port |
| Indicator Light | HDMI Transmitter | HDMI receiver |
| Link | On | Ethernet on |
| Off | No ethernet signal |
| Run | On | HDMI signal on |
| Off | No HDMI Signal |
| Power | On | Power on |
| Off | Power off |
Installation:
1. Connect the HDMI source to the HDMI transmitter with an HDMI
cable.
2. Connect the HDMI receiver to the display device with an HDMI
cable.
3. Connect the sender and the receiver with a Category 5 or
Category 6 (recommended) network cable.
4. Connect the 12V power supply to the device. When the device is
powered, the POWER light is on. When the video status light is on,
the device starts normally.
Package Information:
Standard package for 1pair 4K HDMI Extender over Ethernet:
1pcs HDMI transmitter&receiver,
2pcs DC12V1A power adaptors
1pcs user manual
All with pearl cotton protection
Connection Diagram:
Point to Point Application:
Point to Multi Points Application
